2587-1366_2017_1_1

Author: Doç.Dr. Cahit Bilim, Prof.Dr. Cengiz Duran Atiş Publishing Date: 2017 E-ISSN: 2587-1366 Volume 1 Issue 1 ABSTRACT: In this study, the carbonation depths of slag mortars activated by sodium silicate (water glass), sodium hydroxide and sodium carbonate were investigated and the results were compared to those of control mortar with CEM I 42.5 R normal Portland cement. In the mixture, […]

Author: Gökhan Arslan, Kaan Yaman Publishing Date: 2017 E-ISSN: 2587-1366 Volume 1 Issue 1 ABSTRACT: Energy efficiency in buildings is an important up-to-date topic. For that reason, accurate calculation of heating and cooling loads is essential. In this study, heating and cooling loads of a residential house were determined by using national standards for different climatic zones Mersin, İstanbul, Ankara, Erzincan,

Author: Serpil SAVCI Publishing Date: 2017 E-ISSN: 2587-1366 Volume 1 Issue 1 ABSTRACT: In this study, removal of original biodiesel wastewater (BOD, COD, oil&greas) by yellow mustard seeds was examined by a batch system. The effect of the adsorption time 300 minutes, adsorbent dose (1.0 g/L) and mixing rate (120 rpm) on the adsorption capacity of pollutants. The applicability of the

Author: T. Fikret Kurnaz Publishing Date: 2017 E-ISSN: 2587-1366 Volume 1 Issue 1 ABSTRACT: It is necessary to determine the local soil properties in order to safe constructions in settlement areas under the earthquake hazard. In this study, the local soil conditions of Kazimpasa region in Adapazari were investigated by geological, geophysical and geotechnical data in order to evaluate the soil

Author: Berat Baris Buldum, Suleyman Cinar Cagan Publishing Date: 2017 E-ISSN: 2587-1366 Volume 1 Issue 1 ABSTRACT: Ball burnishing is a simple, cost-effective and fast finishing process generally applied to better the surface roughness of machine parts. In this study, the Taguchi L18 orthogonal array method is used to find the optimal surface roughness in ball burnishing of AZ91D magnesium alloy.